Environmental
Operating Temperature: -30
Storage Temperature: -40
Humidity: 0 - 100% 5 - 95% (non-condensing)
Area Classification: Class II, Div 2 with Purge None
Purge Recommended for corrosion protection
Electrical
Supply Voltage: 52 VDC, 3A from Control Panel
12 VDC, 15A from Control Panel 90 - 250 VAC, 50-60 Hz +/- 10%
Power required: 150 Watts
Drive Brushless D.C. motor
Position Sensor Motor Resolver
Output Level: 0-20mA/0-10V
Density: 0-20mA/0-10V
Connections: 3-lug terminal block for AC power; 2-slot terminal blocks for Level/Density outputs
Cabling: (between Motor Panel and Control Panel, tested to 1000 feet)
1 - 500 feet distance: 16 Ga, 4 Cond w/shield (motor pwr)
18 Ga, 6 Cond w/shield (detector)
22 Ga, 12 Cond w/shielded pairs (resolver feedback)
22 Ga, 19 Cond w/shield (panel status)
501 to 1000 feet distance: 16 Ga, 4 Cond w/shield (motor pwr)
18 Ga, 6 Cond w/shield (detector)
18 Ga, 12 Cond w/shielded pairs (resolver feedback)
18 Ga, 19 Cond w/shield (panel status)
Mechanical
Housing Motor Cabinet: NEMA-4 / IP65 (24x24x10”)
Control Cabinet: NEMA-4 / IP65 (18x24x10”)
Weight: 100 - 150 lbs. less than 50 lbs.
Loading Source - 42 lbs. max
Detector - 42 lbs. max
Motor Panel Control Panel
Measuring Range: 50 feet max
Measuring Speed: .02 to 3 ft/min.
Traversing Speed: .02 to 32 ft/min.
Resolution Selectable: 1/4”, 1/2”, 1”
Repeatability: .060” @ 3 ft/min. .012 @ 1 ft/min.
Sourceholder
Model SA-15 (SA-4 optional)
Construction Steel Weldment, Lead-Filled
Weight Approx 75 lbs.
Safety Lockable in the OFF position
Stray Field < 5mR/hr @ 12”
Radiation Detector
Model DET-14662 Style
Active Length 1.5”
Type Scintillator
Material 304 SS
Weight 8 lbs.
Supply Voltage +24 VDC from Computer
Power Required 1 Watt
Connection CGB/Terminal Block
Area Rating General Purpose
X99 Computer
Model X99 Motorized Density
Supply Voltage 85 to 250 VAC +/- 10%
Power Required 15 Watts
Ambient Temperature -40
Humidity 0 to 95% non-condensing
Controls Handheld Programmer
Outputs Level: 0-20mA/0-10V
Density: 0-20mA/1-10V
Alarm Outputs
User-Defined Alarms (3) 3 Form ‘C’ Relays
Detector Fault 1 Form ‘C’ Relay
Motor/Drive Error 1 Form ‘C’ Relay
Motor Panel Error 1 Form ‘C’ Relay
Computer I/O Comm. Error 1 Form ‘C’ Relay
Computer Power Fail 1 Form ‘C’ Relay
Source/Detector @ Home Position 1 Form ‘C’ Relay
| 
| 
| 
| 
| 
| 
| 
| 
